Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-170-45, THW-165-37, KNCS-140-32, KNCS-175-40.5, KNCS-N-170-43, ROTA THW plus 165-43
|
Unit Price:
$310.00
|
Total Price:
$0.00
|
|
Semi-special "half-pitch offset" master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. Half pitch jaw allows use of hard jaws when actuating cylinder lacks sufficient stroke to move jaws more than the adjustment pitch. This set fits chuck models UC2/NCSE-170-45, THW-165-37, KNCS-140-32, KNCS-175-40.5, KNCS-N-170-43, ROTA THW plus 165-43
|
Unit Price:
$595.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-210-52, UC2/NCSE-225-68, THW-210-52, KNCS-200-41, KNCS-210-52, KNCS-215-52, KNCS-N-210-52, KNCS-N-225-65, ROTA THW plus 215-66, ROTA THW plus 185-52
|
Unit Price:
$345.00
|
Total Price:
$0.00
|
|
Semi-special "half-pitch offset" master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. Half pitch jaw allows use of hard jaws when actuating cylinder lacks sufficient stroke to move jaws more than the adjustment pitch. This set fits chuck models UC2/NCSE-210-52, UC2/NCSE-225-68, THW-210-52, KNCS-200-41, KNCS-210-52, KNCS-215-52, KNCS-N-210-52, KNCS-N-225-65, ROTA THW plus 215-66, ROTA THW plus 185-52
|
Unit Price:
$595.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Fits 200 - 225 size chucks. Top jaw mounts via 1.5 mm x 60° pitch fine serration that fits most Japanese top jaws. Top jaw key width is 14 mm, M 12 tapped holes are spaced 25 mm apart. Allows use of your existing wide top jaws with this key width and bolt configuration. This set fits chuck models UC2/NCSE-210-52, UC2/NCSE-225-68, THW-210-52, KNCS-200-41, KNCS-210-52, KNCS-215-52, KNCS-N-210-52, KNCS-N-225-65, ROTA THW plus 215-66, ROTA THW plus 185-52
|
Unit Price:
$1,195.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-265-77, THW-265-71, KNCS-250-52, KNCS-265-70, KNCS-N-260-72, KNCS-N-275-86, ROTA THW plus 260-81
|
Unit Price:
$390.00
|
Total Price:
$0.00
|
|
Semi-special "half-pitch offset" master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. Half pitch jaw allows use of hard jaws when actuating cylinder lacks sufficient stroke to move jaws more than the adjustment pitch. This set fits chuck models UC2/NCSE-265-77, THW-265-71, KNCS-250-52, KNCS-265-70, KNCS-N-260-72, KNCS-N-275-86, ROTA THW plus 260-81
|
Unit Price:
$695.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Fits 250 - 265 size chucks. Top jaw mounts via 1.5 mm x 60° pitch fine serration that fits most Japanese top jaws. Top jaw key width is 16 mm, M 12 tapped holes are spaced 30 mm apart. Allows use of your existing wide top jaws with this key width and bolt configuration. This set fits chuck models UC2/NCSE-265-77, THW-265-71, KNCS-250-52, KNCS-265-70, KNCS-N-260-72, KNCS-N-275-86, ROTA THW plus 260-81
|
Unit Price:
$1,295.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-315-91, UC2/NCSE-315-104, THW-315-86, KNCS-315-77, KNCS-315-91, KNCS-N-315-91, KNCS-N-340-117, ROTA THW plus 315-104
|
Unit Price:
$480.00
|
Total Price:
$0.00
|
|
Semi-special "half-pitch offset" master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. Half pitch jaw allows use of hard jaws when actuating cylinder lacks sufficient stroke to move jaws more than the adjustment pitch. This set fits chuck models UC2/NCSE-315-91, UC2/NCSE-315-104, THW-315-86, KNCS-315-77, KNCS-315-91, KNCS-N-315-91, KNCS-N-340-117, ROTA THW plus 315-104
|
Unit Price:
$795.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Fits 315 & 400 size chucks. Top jaw mounts via 1.5 mm x 60° pitch fine serration that fits most Japanese top jaws. Top jaw key width is 18 mm, M 14 tapped holes are spaced 30 mm apart. Allows use of your existing wide top jaws with this key width and bolt configuration. This set fits chuck models UC2/NCSE-315-91, UC2/NCSE-315-104, THW-315-86, KNCS-315-77, KNCS-315-91, KNCS-N-315-91, KNCS-N-340-117, ROTA THW plus 315-104
|
Unit Price:
$1,495.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-400-128, THW-400-120, KNCS-400-92, KNCS-400-120, KNCS-400-92, KNCS-400-120, KNCS-N-400-128, ROTA THW 400-120
|
Unit Price:
$510.00
|
Total Price:
$0.00
|
|
Semi-special "half-pitch offset" master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. Half pitch jaw allows use of hard jaws when actuating cylinder lacks sufficient stroke to move jaws more than the adjustment pitch. This set fits chuck models UC2/NCSE-400-128, THW-400-120, KNCS-400-92, KNCS-400-120, KNCS-400-92, KNCS-400-120, KNCS-N-400-128, ROTA THW 400-120
|
Unit Price:
$895.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Fits 500 size chuck. Top jaw mounts via 1.5 mm x 60° pitch fine serration that fits most Japanese top jaws. Top jaw key width is 22 mm, M 20 tapped holes are spaced 43 mm apart. Allows use of your existing wide top jaws with this key width and bolt configuration. This set fits chuck models UC2/NCSE-400-128, THW-400-120, KNCS-400-92, KNCS-400-120, KNCS-400-92, KNCS-400-120, KNCS-N-400-128, ROTA THW 400-120
|
Unit Price:
$1,625.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-500-155, THW-500-128, KNCS-500-128, KNCS-N-500-155, ROTA THW 500-128
|
Unit Price:
$1,250.00
|
Total Price:
$0.00
|
|
|
Unit Price:
$3,250.00
|
Total Price:
$0.00
|
|
Master base jaw for standard model quick jaw change chuck with narrow high performance jaws. Top jaw mounts via European Standard Tongue & Groove and metric bolts. This set fits chuck models UC2/NCSE-630-167, THW-630-160, KNCS-630-160, KNCS-N-630-165, ROTA THW 630-160
|
Unit Price:
$1,450.00
|
Total Price:
$0.00
|
|